About Us
Safford Roof Coating Company
Safford Commercial Roof Coating is a roof coating company serving Safford and four nearby towns. Here is how a job runs, from the first roof walk to the last coat.
How A Coating Job Starts
Every job starts on the roof. We walk the field, edges, drains, and curbs, take moisture readings, and talk with the owner or manager about where leaks show up inside.
That walk produces a repair list and a coating recommendation. Work then gets scheduled around storm season, cold nights, and the hours the building is busiest.
- A written repair list before any coating
- Moisture readings backed by core cuts where needed
- Coats timed for warm, dry hours
- Staging set away from entrances and loading areas
Have A Roof You Want Looked At?
Call to set up a roof walk. Bring what you know about past repairs, and point out where stains show up inside.
What We Check Before Quoting A Safford Coating Job
These items set the scope and the price of a coating job.
- Ponding rings and low spots after storms
- Seams, laps, and fastener rows
- Drains, scuppers, and gutters
- Parapet caps and edge metal
- Curbs, skylights, vents, and pipe boots
- Old coatings and how firmly they hold
- Interior stains and where they sit
- Access, lift placement, and staging room
What We Coat And What We Send To Repair
Some roofs are coating jobs, and some need repair or replacement first.
Coating Jobs
- Metal panels with surface rust that still hold screws
- Flat roofs with dry insulation and repairable seams
- Foam roofs with worn coating over firm foam
- Older acrylic or silicone roofs due for a recoat
- Flat-lying shingles with most granules left
Repair Or Replace First
- Wet insulation across large sections
- Rotted or soft decking
- Panels rusted through in many places
- Curled shingle tabs across the roof
- Widespread blisters in the membrane
Talk To A Roof Coating Company About Your Roof
Get a ballpark range online, or call to set up a roof walk.